Interfaz en español. Las fichas, los resúmenes y las fuentes conservan su idioma original.

Todos los avisosVulnerabilidad
Hablar con Oktsec
Zyxel

Zyxel GS1900 switches

CVE-2026-107441Actualizado 4 nov 2026
Actuar ahoraAtaques confirmados

Seguí las novedades de seguridad

Alertas prioritarias y resúmenes de Radar por correo.

Aviso de seguridad

Canada’s Cyber Centre reports exploitation of CVE-2026-107441. Zyxel describes a path to operating system commands from the local network without authentication and provides firmware fixes for affected GS1900 models.

Quiénes deben revisar: Network teams operating the affected GS1900 switch models, including shared office, campus and branch networks.

Acción recomendadaCorrección disponible

Install the firmware correction for the exact switch model, restrict access to its management interface and review available logs for unexpected activity.

¿Cuál es la vulnerabilidad y su impacto?

The flaw is an out of bounds write in the CGI program of affected GS1900 firmware. Zyxel says an attacker on the LAN can send a crafted HTTP request without logging in and potentially execute operating system commands.

The Canadian Cyber Centre updated its advisory on November 4 to report exploitation in the wild based on public reporting. The notice does not identify victims or quantify the attacks. This exploitation evidence concerns CVE-2026-107441; it must not be transferred to the separate Zyxel advisory covering access points, FWA7 and security routers.

Zyxel provides a different firmware build for each supported model in the table below. Match the full model identifier, including hardware revisions. The vendor says products currently on the market that are not listed are unaffected; that statement is not proof that an unsupported legacy device has a correction.

Oktsec recommends checking who can reach switch management, applying the appropriate correction and examining earlier activity. Network segmentation reduces exposure while patching is arranged; it does not replace the firmware fix.

Proveedor / autor
Zyxel
Identificadores de vulnerabilidad
CVE-2026-107441
Acceso necesario
Depende de la aplicación o configuración
Divulgado
3 nov 2026
Última revisión de evidencia
4 nov 2026 UTC

¿Qué sistemas y versiones están afectados?

ProductoAfectadoVersión corregida / acción
GS1900-82.90(AAHH.2)C0 and earlier2.90(AAHH.3)C0
GS1900-8HP2.90(AAHI.2)C0 and earlier2.90(AAHI.3)C0
GS1900-10HP2.90(AAZI.2)C0 and earlier2.90(AAZI.3)C0
GS1900-162.90(AAHJ.2)C0 and earlier2.90(AAHJ.3)C0
GS1900-242.90(AAHL.2)C0 and earlier2.90(AAHL.3)C0
GS1900-24E2.90(AAHK.2)C0 and earlier2.90(AAHK.3)C0
GS1900-24EP2.90(ABTO.2)C0 and earlier2.90(ABTO.3)C0
GS1900-24HPv22.90(ABTP.2)C0 and earlier2.90(ABTP.3)C0
GS1900-482.90(AAHN.2)C0 and earlier2.90(AAHN.3)C0
GS1900-48HPv22.90(ABTQ.2)C0 and earlier2.90(ABTQ.3)C0

Usá las indicaciones para tu producto y rama. Confirmá con el proveedor las correcciones adaptadas a tu distribución; el nombre del producto por sí solo no establece exposición.

¿Qué se sabe de la explotación?

Ataques observados

Ataques confirmados

Fundamento de la prioridad

Canada reports exploitation. The vendor describes access from the LAN without authentication; prioritize affected switches reachable from untrusted network segments.

¿Qué implica para los entornos de IA?

Compromised network management can affect access to business services and automation hosts; this advisory does not establish attacks targeting AI systems.

Fuentes de este aviso

Abrir evidencia de respaldo y registro técnico
Historial editorial1 entrada

Added verified scope, source evidence and response guidance.

Acciones de respuesta

Prepará tu respuesta

0 de 4 acciones registradas como completadas

Usá esta lista para evaluar si el aviso afecta a tus sistemas, registrar las acciones de tu equipo y compartir el resultado. Radar no escanea ni verifica tu entorno.

Los cambios se guardan automáticamente en este navegador. No se sincronizan con tu equipo ni se envían a Oktsec.

1. Evaluá si aplica a tu entorno

Revisá los sistemas y versiones afectados y registrá tu decisión a continuación. Si tenés dudas, elegí «Requiere verificación».

Evaluación de aplicabilidadSin evaluar

2. Registrá la respuesta

Indicá el sistema y la persona o equipo responsable. Actualizá cada acción y agregá una referencia al ticket o notas sobre lo revisado.

  1. Match the model and firmware

    Record the exact GS1900 model, including HP and hardware revision suffixes, and the installed firmware. Use the matching row below; firmware build identifiers differ between models.

    Agregar evidencia o notasUsá solo referencias. No guardes credenciales ni datos confidenciales acá.
  2. Restrict management access

    Limit access to management interfaces to trusted administration paths and separate them from guest, user and other untrusted network segments. LAN access is an attack prerequisite, not evidence that every internet visitor can exploit a switch.

    Agregar evidencia o notasUsá solo referencias. No guardes credenciales ni datos confidenciales acá.
  3. Install the model-specific correction

    Use Zyxel’s official firmware for the exact model. Back up the configuration, arrange a maintenance window and verify the running firmware and connectivity afterward.

    Agregar evidencia o notasUsá solo referencias. No guardes credenciales ni datos confidenciales acá.
  4. Review earlier activity

    Preserve available management and network logs. Investigate unexpected configuration changes, accounts and connections. Where compromise is suspected, coordinate recovery and rotation of exposed management credentials; a firmware update alone does not establish that earlier access was harmless.

    Agregar evidencia o notasUsá solo referencias. No guardes credenciales ni datos confidenciales acá.

3. Compartí el plan

Descargá un archivo Markdown con tu decisión, los estados de las acciones, las notas y las fuentes. Compartilo con tu equipo o adjuntalo a un ticket.

VERIFICÁ TU ENTORNO

Sistemas afectados y correcciones

Abrir plan de respuesta

Compará la versión en ejecución y la configuración con las indicaciones del proveedor.

ProductoAfectadoVersión corregida / acción
GS1900-82.90(AAHH.2)C0 and earlier2.90(AAHH.3)C0
GS1900-8HP2.90(AAHI.2)C0 and earlier2.90(AAHI.3)C0
GS1900-10HP2.90(AAZI.2)C0 and earlier2.90(AAZI.3)C0
GS1900-162.90(AAHJ.2)C0 and earlier2.90(AAHJ.3)C0
GS1900-242.90(AAHL.2)C0 and earlier2.90(AAHL.3)C0
GS1900-24E2.90(AAHK.2)C0 and earlier2.90(AAHK.3)C0
GS1900-24EP2.90(ABTO.2)C0 and earlier2.90(ABTO.3)C0
GS1900-24HPv22.90(ABTP.2)C0 and earlier2.90(ABTP.3)C0
GS1900-482.90(AAHN.2)C0 and earlier2.90(AAHN.3)C0
GS1900-48HPv22.90(ABTQ.2)C0 and earlier2.90(ABTQ.3)C0

Confirmá con el proveedor las correcciones adaptadas a tu distribución. Coincidir en el producto no basta para establecer exposición.

Acceso necesarioDepende de la aplicación o configuración
EVIDENCIA CON FUENTES

Evidencia y fuentes

Revisado 4 nov 2026 UTC

Por qué tiene esta prioridad

Canada reports exploitation. The vendor describes access from the LAN without authentication; prioritize affected switches reachable from untrusted network segments.

Criterios de prioridad

Evidencia de CISA KEV

Catálogo 2026.11.03 · Revisado 3 nov 2026 UTC

No hay un CVE coincidente en el corte del catálogo revisado. Esto no demuestra ausencia de explotación. Revisá las fuentes del incidente y las indicaciones del proveedor.

Evidencia de respaldo

Producto / CVEEvidencia de ataquesIndicaciones de la fuente
GS1900 series switchesCVE-2026-107441Ataques confirmados

Reportado por las fuentes enlazadas en este aviso.

Zyxel fuenteRevisar sistemas afectados
Estimaciones por CVE1 CVE
CVE-2026-107441

Estimación no disponible. No equivale a un puntaje de cero.

FIRST EPSS · Revisado 2026-11-04 12:33 UTC

La prioridad corresponde al aviso, no a cada producto o CVE por separado. Cada fila muestra solo la evidencia atribuida a ese CVE. La falta de evidencia de ataques no permite descartar una vulnerabilidad. Tu entorno no fue escaneado.

Fuentes

Los datos técnicos provienen de estas fuentes. Las prioridades y las acciones recomendadas son el análisis de Oktsec.

  1. GS1900 affected models, firmware fixes and LAN access requirementZyxel · Aviso del proveedor · Revisado 4 nov 2026 UTC
  2. AV26-1114 Update 1: exploitation reported November 4Canadian Centre for Cyber Security · Aviso gubernamental · Revisado 4 nov 2026 UTC
Registro técnicoProductos, identificadores y detalles de respaldo
Registro del incidente
Producto / servicioGS1900 series switchesZyxel
CVECVE-2026-107441
Evidencia de explotación
Ataques confirmados
Acceso necesarioDepende de la aplicación o configuración
Corrección / respuesta
Divulgado
3 nov 2026
Registro revisado
4 nov 2026 UTC

Para entornos con agentes de IA

Compromised network management can affect access to business services and automation hosts; this advisory does not establish attacks targeting AI systems.